We are carrying out some changes to improve our store - if you find an issue, please let us know by clicking HERE

Bivert Mod Custom Circuit Board For Nintendo Game Boy

Bivert Mod Custom Circuit Board For Nintendo Game Boy

Bivert Mod Custom Circuit Board For Nintendo Game Boy


This custom made PCB is the best and easiest way to Bivert an Original Nintendo Game Boy (DMG-01). Backlighting the dot matrix LCD of your Game Boy decreases the perceived contrast. A Bivert Mod will give you improved contrast and clarity.


Features:

  • Completely wireless installation.
  • Optimised circuit for minimal signal loss or interference.
  • Better results than using a bivert chip.


Installation Tips:

  • Make sure you lift the pins on the friction fit ribbon connector carefully and check that there is no remaining connection to the original pads.
  • Do not use too much solder or heat.
  • Pre-tin the PCB connections that you will be using.
  • Cut any excess component legs that might offset the position of the board (this applies to the two holes on the left).
  • You can cut through the middle of the plated hole in the bottom right corner to make it easier to solder.


Installing this PCB is one part of the Bivert process - the other is to rotate the polarising film that came with your backlight by ninety degrees. This LCD trick makes a dramatic improvement to contrast with most colours of backlight.


For a more detailed description of the process and installation instructions, see our GAME BOY MODDING TUTORIALS.

  • £5.00
  • 10 or more £4.50
  • 20 or more £4.00
  • 30 or more £3.50