RGB Pro Backlight Kit

RGB Pro Backlight Kit

These high-quality backlight kits are a compatible size for both the original Game Boy - DMG and Game Boy Pocket - MGB.

IN ORDER TO CHANGE THE BACKLIGHT COLOUR ONCE INSTALLED YOU MUST HAVE A METHOD OF CONTROL.

Features:

• 7 COLOURS IN ONE BACKLIGHT - Red, Green and Blue individually controlled LEDs for the ULTIMATE CUSTOM GAMEBOY.
• Tune to your favourite colour and leave installed or set up with RGB CONTROL SWITCHES to adjust the backlight colour on the fly!
• FLEXIBLE PRINTED CIRCUIT BOARD.
• Large Solder Pads - easier to solder and stronger connection.

Kit includes:

• Backlight Panel
• Polarisation Film
• 150ohm resistor (Red)
• 2 x 100ohm resistors (Green and Blue)
• 200mm of wire

Installation tips:

• Remove the protective film from BOTH SIDES of the polarising film and from the FRONT of the backlight panel.
• The polarising film has TWO LAYERS of protection on one side.
• Use CONTROL SWITCHES to constantly control the colour of your backlight - connect each colour to ground to illuminate - 7 colours to choose from, any time you like.
• Installing a backlight reduces the perceived contrast of a dot matrix LCD - we recommend also performing a BIVERT MOD to get the best results.
  
• IN ORDER TO CHANGE THE BACKLIGHT COLOUR ONCE INSTALLED YOU MUST HAVE A METHOD OF CONTROL.
  

Please be aware that due to differences in displays across devices, actual product colour may differ slightly.
These are NOT original Nintendo parts but a third party alternative.