We are carrying out some changes to improve our store - if you find an issue, please let us know by clicking HERE

RGB Touch Sensor Controller by DIY Tech

RGB Touch Sensor Controller by DIY Tech

Control your RGB backlight with one touch using this clever little PCB from DIY Tech


NO CASE MODDING REQUIRED!


The touch sensor is sensitive enough that you won't have to modify the exterior shell at all.


Can be placed anywhere in the against the outer wall - I usually locate it on the top side, front half, right corner.


Images will be added to show install example.


Included is a 470uF capacitor which can be installed to reduce noise.


You will need some extra wire to install this product!

  • Product Code: RGB-TOUCH
  • Availability: In Stock
  • £12.00