White Pro Backlight Kit
Click Image for Gallery
BACKLIGHT KITS FOR NINTENDO GAME BOY AND GAME BOY POCKET
These high-quality backlight kits are a compatible size for both the original Game Boy - DMG and Game Boy Pocket - MGB.
- NO RESISTOR - specify your own resistor and choose to have the backlight as bright or as subtle as you choose.
- LARGER SOLDER PADS
- FLEXIBLE PRINTED CIRCUIT BOARD
- Backlight Panel
- Polarisation Film
- 100Ohm Resistor
- 100mm wire
- Install the polarisation film with the concave side facing the LCD (UP) and the convex side (which has a blue stripe on the protective film) facing the backlight panel (DOWN).
- Remove the protective film from BOTH SIDES of the polariser and from the FRONT of the backlight panel.
- Installing a backlight reduces the perceived contrast of a dot matrix LCD - we recommend also installing a HEX INVERTER / BIVERT MOD to get the best results.
YOU MUST USE AT LEAST 100 OHM RESISTOR